M30 x 1.5 Inductive Sensor
Turck’s BI10-P30-AN6X-B2141 inductive sensor is used as a contactless and wear-free way to detect metal objects at car washes. Sensing distance reaches a maximum of 10-millimeters. Constructed with a PA12-GF30 plastic housing. Compatible with 10-30 VDC voltage power connections.
Specifications:
- Ident. no. 46974
- Rated switching distance 10 mm
- Mounting conditions Flush
- Secured operating distance _ (0.81 _ Sn) mm
- Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms= 0.4
- Repeat accuracy _ 2 % of full scale
- Temperature drift _ +/- 10 %
- Hysteresis 3E15 %
- Ambient temperature -25E+70 degC
- Operating voltage 10E30 VDC
- Residual ripple _ 10 % Uss
- DC rated operational current _ 200 mA
- No-load current _ 15 mA
- Residual current _ 0.1 mA
- Isolation test voltage _ 0.5 kV
- Short-circuit protection yes / Cyclic
- Voltage drop at Ie _ 1.8 V
- Wire breakage/Reverse polarity protection yes / Complete
- Output function 3-wire, NO contact, NPN
- Switching frequency 0.5 kHz
- Design Threaded barrel, M30 _ 1.5
- Dimensions 70 mm
- Housing material Plastic, PA12-GF30
- Active area material Plastic, PA12-GF30
- Max. tightening torque of housing nut 5 Nm
- Electrical connection Connector, 7/8”
- Vibration resistance 55 Hz (1 mm)
- Shock resistance 30 g (11 ms)
- Protection class IP67
- MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 degC
- Switching state LED, Yellow
WARNING: This product can expose you to chemicals including Lead, which is known to the State of Californiato cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).
